embed embed2
  • LOOK: Pinoy First-Time Dad Made A Face Shield Out Of A Soda Bottle For His Newborn Son

    It was a spur-of-the-moment idea. The new dad had to make the face shield in under an hour.
    by Rachel Perez .
LOOK: Pinoy First-Time Dad Made A Face Shield Out Of A Soda Bottle For His Newborn Son
PHOTO BY Courtesy of Joey Ong
  • During the COVID-19 global health crisis, pregnant women are advised to go to a hospital only when they're about to give birth. Newborns are susceptible to the disease, and hospitals have protocols in place to make sure the infants receive essential newborn care and that they're protected.

    But parents will always worry about their child and go to great lengths to protect them. First-time dad Joey Ong took matters into his own hands when he made a face shield fit for his newborn son. He shared photos of his baby wearing it in the Smart Parenting Village.

    Joey's wife Ciara gave birth via C-section to their first child, son Joselito, on April 9, 2020. They in Makati Medical Center for four days and three nights, and "the whole time, it was not 100% easy," the new dad told Smartparenting.com.ph. One of his concerns was the trip from the hospital going home.

    ADVERTISEMENT - CONTINUE READING BELOW

    "My wife and I had to really plan our game plan on going home. Where we will pass, what we will do when we get home, steps to do as soon as we enter the house," Joey shared. "It's an extraordinary time, and we really need to take extraordinary measures," he stressed.

    CONTINUE READING BELOW
    Recommended Videos
    "Reaching our home is the best feeling," Daddy Joey said. "Finally felt more comfortable and safe. Being in the hospital was too crazy and scary," he said.
    PHOTO courtesy of Joey Ong
    ADVERTISEMENT - CONTINUE READING BELOW
    What other parents are reading

    Why make a face shield for your newborn baby

    Since newborns are not allowed in MMC's parking lot, Joey's dilemma was that his wife and son would need to walk in the hospital hallways and meet him outside in the driveway. Since Ciara had a C-section, her only companion going to the lobby was a nurse, while Joey gets the car.

    "As a new dad, sobrang nakakatakot now. Kulang na lang balutin ko ng cling wrap yung newborn baby," admitted Joey, founder of Seventeen O' Nine creative kitchens, Dojo Creative Storytellers, and DadBudPH, a Facebook resource group for dads.

    So, the new parents hatched a simple plan: get out as fast as they can to the car, which the new dad will already disinfect before picking up Ciara and Joselito in the driveway.

    They already decided that Ciara would have a blanket over herself and their son while going to the lobby. But it wasn't enough. Then, the new dad's creativity lightbulb lit up upon seeing photos of newborns in Thailand hospitals wearing face shields.

    ADVERTISEMENT - CONTINUE READING BELOW

    What other parents are reading

    Joey hoped that hospitals in the Philipines also provide face shields for newborns, but they don't. So the new dad decided to create one. It turned out just as well. "The mask is cute, and it gives you peace of mind in a way," he said.

    Look at little Joselito peacefully sleeping comfortably while wearing a face shield made by his dad.
    PHOTO Courtesy of Joey Ong
    ADVERTISEMENT - CONTINUE READING BELOW

    How to make a face shield for newborns

    It was a spur-of-the-moment idea. Joey decided to make a face shield as the hospital was processing his wife and son's discharge papers. The resourceful dad had only an hour to finish creating the face shield using available materials.

    "I used a two-liter Royal clear soda bottle. That was the only one available in Mercury Drug store across MMC. Then, a surgical face mask for the band and tissue paper and medical tape. Para-paraan lang," Joey shared.

    As of press time, his post in the Smart Parenting Village has more than 3,000 reactions and 175 comments. A lot of parents, especially those expecting moms and dads, are asking how it's done.

    If you can't imagine how all the materials ended up as a face shield, Joey uploaded a how-to video on how he made it. He's replicating it for two of his friends who are expecting the arrival of their babies in the next two weeks.

    ADVERTISEMENT - CONTINUE READING BELOW
    The infant wore his face shield as his mom carried her through the hospital hallways and out to the driveway to meet and get on the car to go home.
    PHOTO Courtesy of Joey Ong
    What other parents are reading

    Here's what you'll need:

    • two-liter clear soda bottle
    • surgical face mask for the band
    • tissue or foam for the cushion
    • medical tape
    • scissors
    ADVERTISEMENT - CONTINUE READING BELOW

    Here's how to make it:

    1. First, cut the soda water bottle in the desired size of the shield, approximately six inches wide, which fits infants' faces nicely. Don't forget to smoothen the corners and make sure there are no sharp edges.
    2. Next, cut out a 'headband" that's just about the width of the face shield from just below the neck of the soda bottle.
    3. Using the face mask, wrap the headband with some tissue or foam. Stick it onto the top end of the face shield. Tape the face mask's band at the back to tighten it, so the guard is snug on your newborn's head.
    4. Place it over your baby's bonnet or beanie for added cushion.

    Yes, it's simple as that! Watch Daddy Joey's video below:

    What to do if you're pregnant and a suspected, probable, or confirmed COVID-19 patient? Click here

    What other parents are reading

View More Stories About
Trending in Summit Network
View more articles